Product Center
1361 616 Chlorinated Rubber Red Iron Oxide High-Performance Anti-Rust Coating
Category:
Keywords:
1361 616 Chlorinated Rubber Red Iron Oxide High-Performance Anti-Rust Coating
Product Description
Product Introduction
1361 is an anti-rust paint formulated with chlorinated rubber, iron oxide red and other anti-corrosion pigments, plasticizers, additives, and solvents, offering excellent corrosion protection and water resistance.
Application areas
It is suitable for rust prevention on ship bottoms, marine waterlines, offshore steel structures, and other steel structures.
Product Information
Appearance: Iron Red
Solid volume: 42±3%
Recommended dry film thickness: 75 μm (corresponding to a wet film thickness of 179 μm)
Theoretical coverage (75 µm): 5.6 m²/L or 4.3 m²/kg
Specific gravity: 1.3 kg/L
Flash point: above 31°C
Construction conditions
The primer coat should be completely dry.
Remove all oil stains and debris from the paint film.
The substrate temperature must be at least 3°C above the dew point, and the ambient relative humidity must be below 85%.
It is recommended to apply the product at temperatures above -10°C, and the application surface must be clean and dry.
During construction and the drying process, vigorous ventilation is recommended.
At higher temperatures, a suitable amount of thinner may be added to prevent dry spraying.
Painting method
Application Method: Airless Spraying / Air-Assisted Spraying / Brushing / Roller Coating
Thinner 101 Thinner
Dilution Ratio: 0–5% (by weight of the paint; the actual amount added can be adjusted according to on-site application methods)
Nozzle diameter: 0.4–0.5 mm
Ejection pressure: 15–20 MPa
Drying time |
||||
Temperature |
5℃ |
10℃ |
20℃ |
30 °C |
Surface dry |
4 hours |
3 hours |
2 hours |
1 hour |
Pragmatism |
24 hours |
18 hours |
12 hours |
8 hours |
Recoating interval |
|||||
Subsequent coating |
Temperature |
5℃ |
10 °C |
20 °C |
30 °C |
Chlorinated rubber |
Shortest |
12 hours |
10 hours |
8 hours |
6 hours |
Longest |
Unlimited |
Unlimited |
Unlimited |
Unlimited |
|
Paint film thickness
It is recommended to apply two coats, with a dry film thickness of 150 μm. When using 615‑1 and 615‑2 aluminum‑powder chlorinated rubber anti‑rust paints as the primer, the total dry film thickness shall be no less than 240 μm.
Primer and topcoat: 615-1 or 615-2 aluminum‑powder chlorinated rubber anti‑rust paint, or 546 epoxy‑asphalt extra‑thick‑paste anti‑rust paint, or 846 epoxy‑asphalt thick‑paste anti‑rust paint.
Packaging Specifications
22 kilograms
Shelf life
12 months
Safety measures
See the company’s Material Safety Data Sheet (MSDS).
Disclaimer: The information and data provided herein are based on our testing and practical experience, and are intended as a guide for application. For applications carried out under conditions beyond our control, we warrant only the quality of the paint itself; we assume no responsibility for any other issues. We reserve the right to revise this instruction manual in light of ongoing product improvements.
Recommended Products
Welcome to leave us a message or inquiry.
Contact Us
Phone:15251007713
Email:hn882025@126.com
Address: Room 1023, 10th Floor, Building 293, Phase II (6), Island No. 2, Hainan Haifashan Island, Binhai New Area, Baimajing Town, Danzhou City, Hainan Province
Copyright © 2025 Hainan Jiemei International Trade Co., Ltd. All Rights Reserved.