Product Center
1170 706 Rust-Proof Coating
Category:
Keywords:
1170 706 Rust-Proof Coating
Product Description
Product Introduction
1170 is an anti-rust paint formulated with a synthetic resin base, along with rust‑inhibiting pigments such as zinc phosphate and red iron oxide, plus fillers, additives, and solvents. It offers excellent corrosion protection and dries relatively quickly.
Application areas
It is suitable for use as an anti-rust coating on the above-water surfaces of ships and on steel structures on land, and can be used in combination with conventional topcoats such as phenolic and alkyd paints.
Product Information
Appearance: Red and gray
Solid volume: 49±3%
Recommended dry film thickness: 40 μm (corresponding to a wet film thickness of 82 μm)
Theoretical coverage (40 µm): 12.25 m²/L or 9.8 m²/kg
Specific gravity: 1.25 kg/L
Flash point: above 35°C
Construction conditions
New steel: blast-cleaned to Sa2.5 grade, or ground with an elastic abrasive wheel to St3 grade.
Steel coated with shop primer: Re‑remove rust and repair paint film damage at affected areas by grinding with an elastic abrasive wheel to St3 grade.
Welding, flame cutting, or hot‑working correction of the combustion area: grind to St3 grade using an elastic abrasive wheel.
The substrate temperature must be at least 3°C above the dew point, and the ambient relative humidity must be below 85%.
It is recommended to apply the product at temperatures above -10°C, and the application surface must be clean and dry.
During construction and the drying process, vigorous ventilation is recommended.
Painting method
Application Method: Airless Spraying / Air-Assisted Spraying / Brushing / Roller Coating
Thinner 104 Thinner
Dilution Ratio: 0–5% (by weight of the paint; the actual amount added can be adjusted according to on-site application methods)
Nozzle diameter: 0.4–0.5 mm
Ejection pressure: 12–15 MPa
Drying time |
||||
Temperature |
5℃ |
15℃ |
25℃ |
35 °C |
Surface dry |
8 hours |
6 hours |
3 hours |
2 hours |
Pragmatism |
24 hours |
18 hours |
12 hours |
8 hours |
Recoating interval |
|||||
Subsequent coating |
Temperature |
5℃ |
10 °C |
20 °C |
30 °C |
Chlorinated rubber |
Shortest |
36 hours |
30 hours |
24 hours |
16 hours |
Longest |
Unlimited |
Unlimited |
Unlimited |
Unlimited |
|
Paint film thickness
When applying this paint, the dry film thickness should not exceed 80 µm.
Packaging Specifications
24 kilograms
Shelf life
12 months
Safety measures
See the company’s Material Safety Data Sheet (MSDS).
Disclaimer: The information and data provided herein are based on our testing and practical experience, and are intended as a guide for application. For applications carried out under conditions beyond our knowledge or control, we warrant only the quality of the paint itself; we assume no responsibility for any other issues. We reserve the right to revise this instruction manual in light of ongoing product improvements.
Recommended Products
Welcome to leave us a message or inquiry.
Contact Us
Phone:15251007713
Email:hn882025@126.com
Address: Room 1023, 10th Floor, Building 293, Phase II (6), Island No. 2, Hainan Haifashan Island, Binhai New Area, Baimajing Town, Danzhou City, Hainan Province
Copyright © 2025 Hainan Jiemei International Trade Co., Ltd. All Rights Reserved.