Product Center
1360 615 Chlorinated Rubber Aluminum Powder Anti-Rust Coating
Category:
Keywords:
1360 615 Chlorinated Rubber Aluminum Powder Anti-Rust Coating
Product Description
Product Introduction
1360 is an anti-rust paint formulated with chlorinated rubber, plasticizers, aluminum powder and other rust-inhibiting pigments, along with additives and solvents, offering excellent corrosion resistance and water resistance.
Application areas
It is suitable for rust prevention on ship bottoms, marine waterlines, offshore steel structures, and other steel structures.
Product Information
Appearance: Silver-white
Solid volume: 37±3%
Recommended dry film thickness: 40 μm (corresponding to a wet film thickness of 108 μm)
Theoretical coverage (40 µm): 9.25 m²/L or 8 m²/kg
Specific gravity: 1.15 kg/L
Flash point: above 31°C
Construction conditions
New steel: blast-cleaned to Sa2.5 grade, or ground with an elastic abrasive wheel to St3 grade.
Steel coated with shop primer: Perform secondary rust removal at areas of coating damage and corrosion, grinding to St3 grade using an elastic abrasive wheel.
Welding, flame cutting, or thermal straightening of the heated area: grind to St3 grade using an elastic abrasive wheel.
The substrate temperature must be at least 3°C above the dew point, and the ambient relative humidity must be below 85%.
It is recommended to apply the product at temperatures above -10°C, and the application surface must be clean and dry.
During construction and the drying process, vigorous ventilation is recommended.
At higher temperatures, a suitable amount of thinner may be added to prevent dry spraying.
Painting method
Application Method: Airless Spraying / Air-Assisted Spraying / Brushing / Roller Coating
Thinner 101 Thinner
Dilution Ratio: 0–5% (by weight of the paint; the actual amount added can be adjusted according to on-site application methods)
Nozzle diameter: 0.4–0.5 mm
Ejection pressure: 15–20 MPa
Drying time |
||||
Temperature |
5℃ |
10℃ |
20℃ |
30 °C |
Surface dry |
4 hours |
4 hours |
2 hours |
1 hour |
Pragmatism |
24 hours |
18 hours |
12 hours |
8 hours |
Recoating interval |
|||||
Subsequent coating |
Temperature |
5℃ |
10 °C |
20 °C |
30 °C |
Chlorinated rubber |
Shortest |
12 hours |
10 hours |
8 hours |
6 hours |
Longest |
Unlimited |
Unlimited |
Unlimited |
Unlimited |
|
Paint film thickness
It is recommended to apply two coats, achieving a dry film thickness of 80–120 μm.
Primer for the preceding process: 702 epoxy zinc‑rich shop primer, 703 epoxy red iron oxide shop primer, or 704 inorganic zinc silicate shop primer; alternatively, apply directly to steel surfaces that meet the required blast‑cleaning standards.
Packaging Specifications
22 kilograms
Shelf life
12 months
Safety measures
Refer to the company’s Material Safety Data Sheet (MSDS).
Disclaimer: The information and data provided herein are based on our testing and practical experience, and are intended as a guide for application. For applications carried out under conditions beyond our control, we warrant only the quality of the paint itself; we assume no responsibility for any other issues. We reserve the right to revise this instruction manual in light of ongoing product improvements.
Recommended Products
Welcome to leave us a message or inquiry.
Contact Us
Phone:15251007713
Email:hn882025@126.com
Address: Room 1023, 10th Floor, Building 293, Phase II (6), Island No. 2, Hainan Haifashan Island, Binhai New Area, Baimajing Town, Danzhou City, Hainan Province
Copyright © 2025 Hainan Jiemei International Trade Co., Ltd. All Rights Reserved.