Product Center
7591 839 Long-acting thick-paste antifouling coating
Category:
Keywords:
7591 839 Long-acting thick-paste antifouling coating
Product Description
Product Introduction
7591 is a high-performance, long‑lasting, self‑polishing antifouling paint formulated with acrylic resin as the binder, cuprous oxide as the primary antifouling agent, and various auxiliary additives. The resulting coating delivers outstanding antifouling performance, effectively preventing marine organisms from fouling the ship’s hull for an extended period, with an antifouling service life of 36 months or longer.
Application areas
It is suitable for use as an antifouling paint on marine structures such as ship hulls, piers, offshore platforms, navigation aids, and submerged steel gates to prevent the attachment and fouling of marine organisms.
Product Information
Appearance: Red and brown
Solid volume: 56±3%
Recommended dry film thickness: 50–100 μm (corresponding to a wet film thickness of 89–178 μm)
Theoretical coverage (100 µm): 5.6–11.2 m²/L or 2.55–5.1 m²/kg
Specific gravity: 2.2 kg/L
Flash point: 28°C
Construction conditions
The substrate shall be clean and dry, and the application temperature must be at least 3°C above the dew point to prevent condensation.
It is recommended to apply this product under conditions where the relative humidity is below 85%.
This product can be applied in environments as low as -10°C.
Ensure adequate ventilation during the drying process.
During maintenance, any residual self‑polishing or erodible antifouling paint must be removed with an appropriate cleaning agent to eliminate surface oils and other contaminants, followed by a thorough rinse with high‑pressure fresh water to remove poorly adherent saponified layers.
During maintenance, whether or not to apply a topcoat depends on the type and condition of the remaining antifouling paint.
Painting method
Application Method: Airless Spraying
Thinner 102 Thinner
Dilution ratio: 0–5% (by weight of the paint; the actual amount added can be adjusted according to on-site application methods)
Nozzle diameter: 0.4–0.5 mm
Ejection pressure: 15–30 MPa
Drying time |
||||
Temperature |
5℃ |
10℃ |
20℃ |
30 °C |
Finger-dry |
6 hours |
3 hours |
1.5 hours |
1 hour |
Pragmatism |
36 hours |
30 hours |
24 hours |
16 hours |
Recoating interval |
|||||
Subsequent coating |
Temperature |
5℃ |
10 °C |
20 °C |
30 °C |
Antifouling paint |
Shortest |
36 hours |
24 hours |
16 hours |
8 hours |
Longest |
15 days |
15 days |
15 days |
15 days |
|
Dock-out time |
|||
Temperature |
5℃ |
20 °C |
30 °C |
Shortest dock-out time |
36 hours |
24 hours |
16 hours |
Maximum dock-out time |
15 days |
15 days |
15 days |
Paint film thickness |
||
Docking Interval (months) |
New ship construction |
Old vessel maintenance |
12 months |
100um X 1 |
100um X 1 |
24 months |
100um X 2 |
100um X 2 |
36 months |
100um X 3 |
100um X 3 |
Packaging Specifications
21.5 kilograms
Shelf life
12 months
Safety measures
See the company’s Material Safety Data Sheet (MSDS).
Disclaimer: The information and data provided herein are based on our testing and practical experience, and are intended as a guide for application. For applications carried out under conditions beyond our control, we warrant only the quality of the paint itself; we assume no responsibility for any other issues. We reserve the right to revise this instruction manual in light of ongoing product improvements.
Recommended Products
Welcome to leave us a message or inquiry.
Contact Us
Phone:15251007713
Email:hn882025@126.com
Address: Room 1023, 10th Floor, Building 293, Phase II (6), Island No. 2, Hainan Haifashan Island, Binhai New Area, Baimajing Town, Danzhou City, Hainan Province
Copyright © 2025 Hainan Jiemei International Trade Co., Ltd. All Rights Reserved.