Product Center
4360 Chlorinated Rubber Topcoat
Category:
Keywords:
4360 Chlorinated Rubber Topcoat
Product Description
Product Introduction
4360 is a high-performance chlorinated rubber topcoat formulated with chlorinated rubber, plasticizers, titanium dioxide, color pigments, additives, and solvents, offering excellent corrosion resistance and water resistance.
Application areas
It is suitable for use as a protective and decorative topcoat on the waterline, hull, superstructure of ships, as well as on steel structures in power plants, steel mills, ports, chemical plants, bridges, container terminals, hydraulic steel gates, factory buildings, the exterior walls of oil storage tanks, dry gas holders, and various other onshore steel structures.
Product Information
Appearance: Color-adjustable, semi-gloss
Solid volume: 42±3%
Recommended dry film thickness: 70 μm (corresponding to a wet film thickness of 168 μm)
Theoretical coverage (70 µm): 6 m²/L or 4.3 m²/kg
Specific gravity: 1.4 kg/L
Flash point: above 31°C
Construction conditions
The primer must be completely dry. Remove all oil and debris from the paint film.
The substrate temperature must be at least 3°C above the dew point, and the ambient relative humidity must be below 85%.
It is recommended to apply the product at temperatures above -10°C, and the application surface must be clean and dry.
During construction and the drying process, strong ventilation is recommended.
At higher temperatures, a suitable amount of thinner may be added to prevent dry spraying.
Painting method
Application Method: Airless Spraying / Air-Assisted Spraying / Brushing / Roller Coating
Thinner 101 Thinner
Dilution Ratio: 0–5% (by weight of the paint; the actual amount added may be adjusted according to on-site application methods)
Nozzle diameter: 0.43–0.48 mm
Ejection pressure: 10–20 MPa
Drying time |
||||
Temperature |
5℃ |
10℃ |
20℃ |
30 °C |
Surface dry |
6 hours |
4 hours |
2 hours |
1 hour |
Recoating interval |
|||||
Subsequent coating |
Temperature |
5℃ |
10 °C |
20 °C |
30 °C |
Chlorinated rubber |
Shortest |
6 hours |
4 hours |
2 hours |
1 hour |
Longest |
Unlimited |
Unlimited |
Unlimited |
Unlimited |
|
Paint film thickness
Non‑recommended dry film thicknesses may be used depending on the application and substrate; this will alter the coverage rate and affect drying time and recoat intervals. The standard dry film thickness per coat is 40–110 microns.
Packaging Specifications
18 liters or 25 kilograms
Shelf life
24 months
Safety measures
Refer to the company’s Material Safety Data Sheet (MSDS).
Disclaimer: The information and data provided herein are based on our testing and practical experience, and are intended as a guide for application. For applications carried out under conditions beyond our control, we warrant only the quality of the paint itself; we assume no responsibility for any other issues. We reserve the right to revise this instruction manual in light of ongoing product improvements.
Recommended Products
Welcome to leave us a message or inquiry.
Contact Us
Phone:15251007713
Email:hn882025@126.com
Address: Room 1023, 10th Floor, Building 293, Phase II (6), Island No. 2, Hainan Haifashan Island, Binhai New Area, Baimajing Town, Danzhou City, Hainan Province
Copyright © 2025 Hainan Jiemei International Trade Co., Ltd. All Rights Reserved.