Product Center
1360 615 Chlorinated Rubber AluminumPowder Antirust Coating
Category:
Keywords:
1360 615 Chlorinated Rubber AluminumPowder Antirust Coating
Product Description
Product introduction
1360 is an antirust coating composed of chlorinated rubberplasticizer, aluminum powder and other antirust pigments,additives and solvents. lt has excellent corrosion and waterresistance.
Recommended applications
It is suitable for rust prevention of ship bottom and corrosionprevention of ship waterline, offshore steel structure buildingsand other steel structures.
Product information
Appearance：Silver white
Volume solids：37±3%
Recommended DFT：40 μm (corresponding WFT=108 μm)
Theoretical quantity required (40 μm)：9.25 m 2 /L or 8 m 2/kg
SG：1.15 kg/L
Flash point：Above 31°C
Construction conditions
New steel: Sand blasting to Sa2.5 or grinding to St3 with anelastic grinding wheel.
Steel coated with shop primer: Derust the damaged films andrusted parts for the second time, and polish to St3 with anelastic grinding wheel.
Use welding, flame cutting or hot work to correct the burnedparts: Polish it to St3 with an elastic grinding wheel.
The substrate must have a temperature >3°C above the dewpoint.The environment should be <85%RH.
It is recommended to paint at above -10'c, The painting surfacemust be clean and dry.
It is recommended to maintain strong ventilation duringpainting and drying.
In case of high temperature, diluent will be added appropriately toavoid dry spraying.
Painting method
Painting methods：airless spraying/air spraying/brush coating/ roller coating
Diluent：101 diluent
Dilution：0-5% of the coating weight, The actual addition may be adjusted according to the field painting method
Nozzle size：0.4-0.5 mm
Spraying pressure：15-20 Mpa
| Drying time | ||||
| Temperature | 5℃ | 10℃ | 20℃ | 30℃ |
| Surface drying | 4h | 3h | 2h | 1h |
| Hard drying | 24h | 18h | 12h | 8h |
| Repainting interval | |||||
| Subsequent coats | Temperature | 5℃ | 10℃ | 20℃ | 30℃ |
| Chlorinated rubberor acrylic acid | Shortest | 12h | 10h | 8h | 6h |
| Longest | Unlimited | Unlimited | Unlimited | Unlimited | |
Film thickness
It is recommended to apply 2-3 coats with a dry film thickness of 80-120um.
Coating for the previous coat: 702 epoxy zinc-rich workshop primer or 703 epoxy iron red workshop primer, 704 inorganiczinc silicate workshop primer, or directly coated on the steel surface that meets the rust removal quality requirements.
Packing specifications：22kg
Shelf life：12 months
Safety measures：Refer to our Material Safety Data sheet(MSDs)
Disclaimer: The above produtiformatin and data are accumulated acordina to ou experience in experiments and pracicaluse, and can be used as a constuction quideFor painting works that we are not informed, we ony guarantee the qualty ofthe coating itsel,butwe are not responsilble for other problems. We have the righto modify thimanualdue to the continuous improvement of our product.
Previous:
Next:
Recommended Products
Welcome to leave us a message or inquiry.
Contact Us
Phone:15251007713
Email:hn882025@126.com
Address: Room 1023, 10th Floor, Building 293, Phase II (6), Island No. 2, Hainan Haifashan Island, Binhai New Area, Baimajing Town, Danzhou City, Hainan Province
Copyright © 2025 Hainan Jiemei International Trade Co., Ltd. All Rights Reserved.