Product Center
3017 Epoxy-Phenolic Coating
Category:
Keywords:
3017 Epoxy-Phenolic Coating
Product Description
Product Introduction
3017 is an amine‑adduct‑cured phenolic epoxy coating that exhibits excellent film adhesion, outstanding chemical resistance, and a broad service temperature range. The coating can withstand corrosive environments from ultra‑low temperatures of –196°C up to high temperatures of 210°C.
Application areas
It can be used as a chemical‑resistant lining coating, an anti‑corrosion coating beneath insulation or in non‑insulated areas, for corrosion protection in seawater or freshwater immersion environments, and for ultra‑low‑temperature corrosion resistance.
Product Information
Appearance: Gray/Other
Solid content: 68±3%
Mixing ratio: 8.4:1 (by volume) or 14:1 (by weight)
Mixed application period: 3 hours (20°C)
Complete curing: 7 days
Recommended dry film thickness: 125 μm (corresponding to a wet film thickness of 184 μm)
Theoretical coverage (125 µm): 5.5 m²/L or 3.2 m²/kg
Specific gravity: 1.7 kg/L (specific gravity may vary slightly with color)
Flash point: 26°C
VOC content: 317 g/L
Construction conditions
New steel: blast-cleaned to Sa2.5 grade, with a surface roughness of Medium (G) (ISO 8503-2).
Maintenance: Remove grease and other contaminants with an appropriate cleaning agent; use high-pressure fresh water to rinse away salt and other residues; perform localized sandblasting or grinding as needed.
The substrate temperature must be at least 3°C above the dew point, and the ambient relative humidity must be below 85%.
It is recommended to apply the product at temperatures above 5°C, and the application surface must be clean and dry.
During construction and the drying/curing process, vigorous ventilation is recommended.
Painting method
Application Method: Airless Spraying
Thinner 103 Thinner
Dilution Ratio: 0–5% (by weight of the paint; the actual amount added may be adjusted according to on-site application methods)
Nozzle diameter: 0.43–0.53 mm
Ejection pressure: 15–25 MPa
Drying time |
||||
Temperature |
0℃ |
10℃ |
20℃ |
30 °C |
Surface dry |
8 hours |
4 hours |
2 hours |
1 hour |
To force one's way through |
32 hours |
16 hours |
8 hours |
4 hours |
Recoating interval |
|||||
Subsequent coating |
Temperature |
5℃ |
10 °C |
20 °C |
30 °C |
Epoxy |
Shortest |
36 hours |
24 hours |
16 hours |
8 hours |
Longest |
60 days |
45 days |
21 days |
14 days |
|
Polyurethane |
Shortest |
36 hours |
24 hours |
16 hours |
8 hours |
Longest |
7 days |
5 days |
72 hours |
72 hours |
|
Paint film thickness
Non‑recommended film thicknesses may be used depending on the application and area; this will alter the coverage rate and affect drying time and recoat intervals. The standard dry film thickness per coat is 50–150 microns.
Packaging Specifications
Component A: 16.1 liters, Component B: 1.9 liters
or
Component A: 28 kg, Component B: 2 kg
Shelf life
Base material: 18 months, Hardener: 18 months
Safety measures
See the company’s Material Safety Data Sheet (MSDS).
Disclaimer: The information and data provided herein are based on our testing and practical experience, and are intended as a guide for application. For applications carried out under conditions beyond our knowledge or control, we warrant only the quality of the paint itself; we assume no responsibility for any other issues. We reserve the right to revise this instruction manual in light of ongoing product improvements.
Recommended Products
Welcome to leave us a message or inquiry.
Contact Us
Phone:15251007713
Email:hn882025@126.com
Address: Room 1023, 10th Floor, Building 293, Phase II (6), Island No. 2, Hainan Haifashan Island, Binhai New Area, Baimajing Town, Danzhou City, Hainan Province
Copyright © 2025 Hainan Jiemei International Trade Co., Ltd. All Rights Reserved.